Impaired Driving



SecretariosJudiciales.com Guidance to Top Legal Matters.

Site Map


What is being done about welding fumes

What is being done about manganese exposure causing manganism?

Researchers are still investigating the link between welding rod fumes and manganism. Welding rod litigation has now begun to help those who suffer the ill health effects of welding and manganese exposure.

Efforts are being made to reduce the risk of environmental manganese exposure. In 1994, the U.S. Environmental Protection Agency (EPA) denied a petition by Ethyl Corporation to allow the use of methylcyclopentadienyl manganese tricarbonyl (MMT) in unleaded gasoline, because of health concerns related to the inhalation of manganese fumes (Davis, 1999).

Other environmental laws have been enacted to limit manganese exposure and welding fume toxicity. However, some scientists feel that more needs to be done about manganism and welding fumes. Researchers studying the health effects of welding fumes report a "preponderance of proof for manganese neurotoxicity" even in present-day industrial settings (Iregren 1999).

According to the U.S.

Department of Labor Mine Safety and Health Administration, Welding Fumes Sampling is required due to the "potential hazards of welding operations including metal fumes, toxic gases, and ultraviolet and infrared radiation. Fume particles are formed from vaporization of molten metal. They are very fine in size, generally one micron or smaller, and may join together to form larger particles. Welding fumes can be sampled by drawing air through a special filter at a controlled rate.

"The adverse health effects of welding exposure include chronic or acute systemic poisoning, metal fume fever (a short-term painful ailment with symptoms of fever and chills), pneumoconiosis (lung disease due to accumulation of mineral or metallic particles), and irritation of the respiratory tract.

"The welding fumes produced at welding operations depend primarily on the composition of the metals being welded and the welding rods. When the base metal is iron or steel, with welding rods of similar composition, the main component of the welding fume will be iron oxide. When welding on stainless steel, welding fumes containing nickel and chromium may be produced. Welding on plated, galvanized or painted metals may generate fumes containing cadmium, zinc oxide or lead. In addition, welding rods can generate fluoride and free silica in the fumes, depending on the composition of the welding rod coating.

"In summary, welding processes may generate many different metal fumes and other toxic components.

It is important that the hazards of a welding operation be evaluated properly. Toxic gases that arise in welding include carbon monoxide, nitrogen dioxides and ozone. If welding or cutting operations are conducted in the presence of chlorinated hydrocarbons, such as the form of solvents either on the metals or in the air, hazardous concentrations of phosgene and hydrogen chloride, which are highly toxic irritant gases, may be produced.

"In addition to the health hazards of metal welding fumes and toxic gases, welding operations involve the hazard of burns from flame, arc, molten metal, heated surfaces and also that of metal splatter. .When personal respiratory protection is required, this may be provided by a supplied-air welding hood or, when the components and concentration of the fume are known, by a filter-type respirator with filter for protection against welding fumes.

It is preferable, of course, that adequate ventilation be provided so as to make the use of respirators unnecessary.

"When sampling for welding fumes, the inspector will use a filter cassette placed on the collar or shoulder so that it is beneath the helmet when the helmet is placed down. The sampling pump is fastened to the belt. Samples [for welding fumes] may be full shift or short-term. Short-term samples may be taken to evaluate toxic [welding fume] components which have short-term limits.

In addition, the inspector may sample for toxic gases such as ozone, nitrogen oxides or phosgene. It is important that the welder carry out the welding operation in a normal way, so that an accurate evaluation of the exposure can be made. The inspector will attach and remove the filter cassette and pump as required.

"Normally, good local or general ventilation is required to control exposures to the metal welding fumes and gases of welding operations. The most effective control is local exhaust ventilation in which an exhaust hood is placed near the welding arc or flame, and the 'welding fume contaminants' are drawn away from the welder's breathing zone. The system may consist of moveable exhaust hoods, flexible and stationary ducts, a powered fan, and a welding fume or dust collector.

Exhausted air containing welding fumes should be discharged to the outdoors, if possible. It is important that, during the welding operation, the exhaust hoods are placed or set so that welding fumes are not drawn across the worker's face or into the breathing zone. Good general ventilation should be provided. Welding in confined spaces, such as tanks, cabs of mobile equipment and large shovels, may be especially hazardous and require additional ventilation to reduce welding fumes.


http://www.msha.gov/S&HINFO/HHICM10.HTMCitation as of 11-15-2004.

. About the Author .

Michael Monheit, Esquire is the managing attorney for Monheit Law, located in Philadelphia, Pennsylvania Monheit Law, P.C. concentrates its practice in the field of plaintiff personal injury cases on a contingency fee basis. They can be found at http://www.monheit.


By: Michael Monheit, Esquire, Monheit Law, PC

Legal Matters

CostCrunching Counsel Nine Keys to Controlling Costs and Improving Legal Services for Your Busines - Attorneys are all about money, right?.

What Makes For a Quality Business Agreement or a Contract - The contract is the foundation of doing business.

Practical vs Legal Getting Model and Property Releases - Depending on the circumstance, a model or property release may not be legally necessary.

New Rules for Revocable Living Trust Accounts and FDIC Insurance - On January 13, 2004, the FDIC adopted new rules for insurance coverage of living trust accounts.

Zyprexa Lawsuitsbr - yprexa litigation has been targeted at a number of Zyprexa side-effect problems: Some patients have reported the Zyprexa side-effect of gaining up to.


© Copyright Legal Matters & Law Practice. All rights reserved.
Unauthorized duplication in part or whole strictly prohibited by international copyright law.